翻新时间:2022-11-19
卡通饮水机底座产品完善及注射成形模具设计
摘要
近几年,随着机械工业的发展,注射模具制造技术在国内外得到了快速发展,注射模具应用的领域越来越广泛。同时人们对注射模具设计的快速性和合理性以及产品的质量要求越来越高。
目前国外模具行业广泛采用CAD/CAM技术,并通过3维设计软件设计和仿真,大大的缩短了产品开发周期和制造周期,提高了模具的技术含量,降低了成本。相比之下,我国模具行业还有很大差距。针对目前注射模具行业的情况,我们必须根据国际模具工业的发展,综合分析国外经验,结合我国实际情况,采取有利措施,提高我国注射模具工业的竞争力。
本课题通过对卡通饮水机底座的分析,以UG、AutoCAD软件为基础,进行了卡通饮水机底座塑件模具的设计,利用参数化实体造型的方法,突破了AutoCAD3维实体造型功能不足的局限,为注射模具设计、加工和生产提供了1种切实可行的办法。本课题取得了比较满意的效果,达到了预期的设计意图。
关键词:注射模具;UG软件;模具设计;饮水机;
Abstract
In recent years,with the development of manufacturing industry,an injection mould which was widely applied in many fields was been developed fast.Meanwhile,the higher requirement of the rapidity and rationality of the injection mould was proposed.
With the application of 3D design software and simulation,the lead time of a mould was shortened with an increase in technology content as well as a reduction in cost in foreign nations.While the development status at home was not very good.In terms of increasing the competitiveness of injection mould industry,foreign experience and development must be learned and effective measures should be taken.
After the analysis for the plastic the base of cartoon water supply machine,the injection mould of the base of cartoon water supply machine was designed by modeling created by parameters based on UG and AutoCAD.So the functional defect of 3D modeling based on AutoCAD was avoided and a feasible method for the design and manufacture of the injection mould was approached.In this paper,the desirable results and expected design were achieved.
Key words:injection mould;UG software;mould design;drinking fountains;
下载文档
网友最新关注
- 我的未来
- 我家的乌龟
- 我是一只小青蛙
- 寻找秋天的足迹
- 游青青世界
- 我的爸爸
- 美丽的深圳夜景
- 游园博园
- 我的妈妈
- 游大梅沙
- 蜜蜂
- 让我们爱上书
- 乌鸦和八哥
- 我做手工
- 正中靶心
- 变电站电气自动化研究分析
- 变频调速技术在外输泵上的应用
- 变频节能技术在螺杆空压机上的运用
- 保障地理信息系统安全的对策
- 变电运行中的继电保护问题解析
- 表面处理废水及电泳废水的回用处理
- 北方园林绿化冬季养管技术措施
- 测绘工程质量的控制措施探讨
- 变压器故障检修工艺规程研究
- 不同开采情况中下沉系数的对比分析
- 变电站电气误操作的原因与相应对策分析
- 采用项目化管理方式,提高合同执行率
- 测绘新技术在工程测量中的应用分析
- 不良地质条件下的隧道施工技术
- 采用水压爆破降低爆破振动
- 《金钱,共同面对的话题·写作·综合性学习》活动设计
- 让学生学的更精彩──《唐雎不辱使命》教后感
- 《史记》简介
- 《香菱学诗》教学设计3
- 司马迁卒年及其死因真相
- 家民革命运动领导者、组织者的光辉形象
- 《唐雎不辱使命》人物形象分析
- 《香菱学诗》教学设计1
- 《香菱学诗》教学设计2
- 历代名家评《史记》
- 《红楼梦》简介
- 《金钱,共同面对的话题·口语交际》活动设计
- 《金钱,共同面对的话题》活动评价
- 关于项燕之死
- 《香菱学诗》教学设计