基于UG的电话机机座上盖－－塑料模具设计与仿真分析

上传者：网友
|

翻新时间：2022-09-17

收藏到账号

全屏

基于UG的电话机机座上盖－－塑料模具设计与仿真分析

摘要：随着CAD/CAE/CAM技术在模具行业的广泛应用，传统的模具设计、制造方法已经逐渐被取代。本文全面的写到了用UG进行电话机机座的注射模具设计过程，重点介绍了CAD/CAE/CAM技术在注射模具中应用。在了解电话机机座造型特点的基础上，利用专业软件UG对其进行3维建模，再生成2维工程图。然后利用UG里的MoldWizard模块进行注塑模具设计，在模具设计基本完成之后，通过Moldflow进行注塑成型流动分析，可以发现设计中存在的缺陷，优化模具设计结构，从而保证模具设计的合理性。最后利用UG对模具型腔进行模拟加工，自动生成加工程序并进行后置处理。

关键词：CAD；CAE；CAM；注塑模；成型分析；模拟加工。

The buttons of telephone injection molding design

based on the UG and simulation analysis

Abstract: Along with the CAD/CAE/CAM technology in the moldprofession widespread application, the traditional mold design, themanufacture method gradually is already substituted. This articlecomprehensive wrote has carried on the telephone in the buttons injection molding design process with UG, introduced with emphasis the CAD/CAE/CAM technology in injection molding to apply. In understood thetelephone in the buttons modelling characteristic in the foundation, use specialized software UG carries on the three dimensional modelling toit, again produces the two-dimensional engineering plat. Then uses the MoldWizard module of UG to carry on injection molding design, basically completes after the mold design, carries on through Moldflow caststakes shape the flow analysis, may discover in the design exists theflaw, optimizes the mold design of structure, thus guaranteed the mold designs rationality. Finally carries on the simulation processing using UG to the mold cavity, automatically produces the processing procedure and carries on postpositioned processing.

Key word: CAD; CAE; CAM; injection molding; Takes shape theanalysis; Simulation processing.

包括：毕业设计图纸、毕业论文、开题报告、外文翻译、实习总结、中期检查