环境监测用一氧化碳气体传感器检测探头NE-CO-SI

Design Features Quick response and high sensitivity Good linearity Good selectivity Low power consumption for battery operation

Technical Information

Electrochemical Carbon-monoxide Sensor NE-CO-SI

(1) Design Features

Quick response and high sensitivity Good linearity Good selectivity

Low power consumption for battery operation

(2) Specifications

[Sensitivity Characteristics]

[Operating Conditions]

深圳市深国安电子科技有限公司

地址：广东省深圳市龙华新区牛栏前大厦Ｃ５０７　　　

蒋小姐：１３４　２８７６　２６３１　　　　　　　电话：８６　７５５－８５２５８９００

网址：ｗｗｗ．ｓｉｎｇｏａｎ．ｃｏｍ　　ｗｗｗ．ｓｉｎｇｏａｎ．ｃｏｍ．ｃｎ　　ｗｗｗ．ｓｈｅｎｇｕｏａｎ．ｃｏｍ

Design Features Quick response and high sensitivity Good linearity Good selectivity Low power consumption for battery operation

[Physical Characteristics]

[Appearance and Dimensions]

Fig.1: Appearance and Dimensions of NE-CO-SI

深圳市深国安电子科技有限公司

地址：广东省深圳市龙华新区牛栏前大厦Ｃ５０７　　　

蒋小姐：１３４　２８７６　２６３１　　　　　　　电话：８６　７５５－８５２５８９００ 网址：ｗｗｗ．ｓｉｎｇｏａｎ．ｃｏｍ　　ｗｗｗ．ｓｉｎｇｏａｎ．ｃｏｍ．ｃｎ　　ｗｗｗ．ｓｈｅｎｇｕｏａｎ．ｃｏｍ

Design Features Quick response and high sensitivity Good linearity Good selectivity Low power consumption for battery operation

(3) Characteristics

(3-1) Linearity

Fig.2: Typical gas sensitivity of NE-CO-SI

(3-2) Cross sensitivity

Table 1: Typical cross sensitivity of NE-CO-SI

深圳市深国安电子科技有限公司

Exposure time ：* 30 minutes

地址：广东省深圳市龙华新区牛栏前大厦Ｃ５０７　　　

蒋小姐：１３４　２８７６　２６３１　　　　　　　电话：８６　７５５－８５２５８９００

网址：ｗｗｗ．ｓｉｎｇｏａｎ．ｃｏｍ　　ｗｗｗ．ｓｉｎｇｏａｎ．ｃｏｍ．ｃｎ　　ｗｗｗ．ｓｈｅｎｇｕｏａｎ．ｃｏｍ

Design Features Quick response and high sensitivity Good linearity Good selectivity Low power consumption for battery operation

(3-3) Temperature dependence

Fig. 4: Typical temperature dependence of NE-CO-SI

Fig.5: Basic test circuit for NE-CO-SI

深圳市深国安电子科技有限公司

地址：广东省深圳市龙华新区牛栏前大厦Ｃ５０７　　　

蒋小姐：１３４　２８７６　２６３１　　　　　　　电话：８６　７５５－８５２５８９００

网址：ｗｗｗ．ｓｉｎｇｏａｎ．ｃｏｍ　　ｗｗｗ．ｓｉｎｇｏａｎ．ｃｏｍ．ｃｎ　　ｗｗｗ．ｓｈｅｎｇｕｏａｎ．ｃｏｍ

Design Features Quick response and high sensitivity Good linearity Good selectivity Low power consumption for battery operation

[Notes]

?Use only within specified conditions.

?Sensor characteristics must be measured in clean air.

?Electrode pins must be correctly connected.

Wrong connection does not allow correct functions.

?Do not apply voltage directly to electrode pins.

?Do not bend pins.

?Do not put excess vibration or shocks.

?If sensor housing is damaged or scratched, do not use.

?Do not blow organic solvents, paints, chemical reagents, oils, or high concentration gases

directly onto sensors.

?Do not solder to pins of sensor directly.

Use exclusive sockets.

?Do not disassemble or change any parts.

?If sensor is used under irregular atmosphere, contact us.

?Do not use contact grease when sensor is connected to the sockets.

Tech.Inf.No.NE-CO-SI-110704

深圳市深国安电子科技有限公司

地址：广东省深圳市龙华新区牛栏前大厦Ｃ５０７　　　

蒋小姐：１３４　２８７６　２６３１　　　　　　　电话：８６　７５５－８５２５８９００ 网址：ｗｗｗ．ｓｉｎｇｏａｎ．ｃｏｍ　　ｗｗｗ．ｓｉｎｇｏａｎ．ｃｏｍ．ｃｎ　　ｗｗｗ．ｓｈｅｎｇｕｏａｎ．ｃｏｍ