2SD2212-2SD2143-2SD1866

2SD2212 / 2SD2143 / 2SD1866

Transistors

Medium Power Transistor

(Motor, Relay drive) (60±10V, 2A)

2SD2212 / 2SD2143 / 2SD1866

zFeatures

1) Built-in zener diode between collector and base. 2) Strong protection against reverse surges due to "L" loads.

3) Built-in resistor between base and emitter. 4) Built-in damper diode.

zAbsolute maximum ratings (Ta=25°C)

zExternal dimensions (Unit : mm)

?2 When mounted on a 40×40×0.7mm ceramic board.

?3 Printed circuit board 1.7mm thick, collector plating 1cm2 or larger.

zPackaging specifications and hFE

Type

PackagehFE

2SD1866ATV1k to 10k

?TV22500

2SD2212MPT31k to 10k

DRT1001000

2SD2143CPT31k to 10k

?TL2500

MarkingCode

Basic ordering unit (pieces)

zEquivalent circuit

Rev.A 1/3

2SD2212 / 2SD2143 / 2SD1866

Transistors

zElectrical characteristics (Ta=25°C)

Parameter

Collector-base breakdown voltageCollector-emitter breakdown voltageCollector cutoff currentEmitter cutoff current

Collector-emitter saturation voltageDC current transfer ratio

SymbolBVCBOBVCEOICBOIEBOVCE(sat)hFEfTCob

Min.5050???1000??

Typ.??????8025

Max.70701.031.510000??

UnitVVµAmAV?MHzpF

IC=50µAIC=5mAVCB=40VVEB=5V

IC/IB=1A/1mA

Conditions

?

Transition frequencyOutput capacitance

? Measured using pulse current.

VCE=2V, IC=1A

VCE=5V, IE= ?0.1A, f=30MHzVCB=10V, IE=0A, f=1MHz

zElectrical characteristics curves

COLLECTOR CURRENT : IC (A)

COLLECTOR CURRENT : IC (A)

COLLECTOR CURRENT : Ic (A)

0.5

11.5

2

COLLECTOR TO EMITTER VOLTAGE : VCE

(V)COLLECTOR TO EMITTER VOLTAGE : VCE (V)BASE TO EMITTER VOLTAGE : VBE (V)

Fig.1 Groundede emitter output characteristics ( Ι )Fig.2 Grounded emitter output characteristics ( ΙΙ )

DC CURR

ENT GAIN : hFE

Fig.3 Grounded emitter propagation characteristics

DC CURRENT GAIN : hFE

COLLECTOR SATURATION VOLTAGE : VCE(sat)(V)

COLLECTOR CURRENT : IC (A)COLLECTOR CURRENT : IC (A)

COLLECTOR CURRENT : IC (A)

Fig.4 DC current gain

vs. collector current ( Ι )Fig.5 DC current gain

vs. collector current ( ΙΙ )

Fig.6 Collector-emitter saturation voltage vs. collector current

Rev.A 2/3

2SD2212 / 2SD2143 / 2SD1866

Transistors

COLLECTOR OUTPUT CAPACITANCE

: Cob (pF)

COLLECTOR SATURATION VOLTAGE : VCE(sat

)(V)

COLLECTOR CURRENT : Ic (A)

1

COLLECTOR CURRENT : IC (A)COLLECTOR TO BASE VOLTAGE : VCB (V)COLLECTOR TO EMITTER VOLTAGE : VCE (V)

Fig.7 Collector-emitter saturation voltage vs. collector currentFig.8 Collector output capacitance vs. collector-base voltage

105

COLLECTOR CURRENT : Ic (A)

Fig.9 Safe operating area (A. S. O)

2SD2212 (MPT)

COLLECTOR CURRENT : Ic (A)

21500m200m100m50m20m10m5m

2m1m

COLLECTOR TO EMITTER VOLTAGE : VCE (V)COLLECTOR TO EMITTER VOLTAGE : VCE (V)

Fig.10 Safe operating area (A. S. O)

2SD2143 (CPT) Fig.11 Safe operating area (A. S. O)

2SD1866 (ATV)

Rev.A 3/3

Appendix

About Export Control Order in Japan

Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade ControlOrder in Japan.

In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.

Appendix1-Rev1.1