LED Head Lights Feedback - 20160308客户反馈Word

　　LED汽车大灯接受

　　LED HEAD LIGHTS FOR SPORTAGE ACTIVE Feedback LED灯 狮跑安装反馈

　　LED汽车大灯接受

　　LED Head Lights

　　Provided LED head light Kit 我们提供的LED灯

　　LED汽车大灯接受

　　Original Head Light

　　CLIP LOCK 夹子 In the original head light, the light bulb inserts into the socket and it locks the bulb with a clip. 原厂的大灯，灯泡就是用夹子锁住的

　　LED汽车大灯接受

　　LED Head Light

　　COOLING FAN

　　BASE

　　With the LED light bulb, the base fits but the problem is the cooling fan of the bulb. 我们的LED灯样品，基座安装没有问题，但是问题在于风扇

　　LED汽车大灯接受

　　LED Head Light

　　It is not possible to screw the bulb into the base because the cooling fan knocks the lock clip and the bulb stays loose.扣不住因为风扇挡住了 Cedars Feedback: please adjust clip by tool such as vice, so that the cooling fan will fix the bulb base perfectly. Cedars反馈： 请调整用工具调整卡箍，比如老虎钳，调整后能 让风扇和基座安装好

　　LED汽车大灯接受

　　LED Head Light

　　Cedars Feedback: please adjust clip by tool such as vice, so that the cooling fan will fix the bulb base perfectly. Cedars反馈： 请调整用工具调整卡箍，比如老虎钳，调整后能让风扇和基 座安装好 FEEDBACK: We perfomed the same procedure as your recommendation, as you can see in the pictures below. The problem is that cooling fan can not be fixed in the bulb because of the clip. It can not be screwed and it stays loose. 反馈： 我们按照你说的操作了一遍，如上面的照片显示的，问题是风扇不

　　LED汽车大灯接受

　　LED Head Light

　　The module box does not fit inside the headlamp and the dust cover can not be locked.整个灯装不进大灯中，防尘罩也锁不了 Cedars Feedback: the module box should be fixed out of dust cover, you need to make a hole in dust cover which the cable can cross the dust cover. Cedars反馈; 驱动器应该安装在防尘罩外面，请在防尘罩上钻个孔，让线穿过去 FEEEDBACK ON THE NEXT PAGE 反馈如下页

　　LED汽车大灯接受

　　LED Head Light

　　Cedars Feedback: the module box should be fixed out of dust cover, you need to make a hole in dust cover which the cable can cross the dust cover. Cedars反馈; 驱动器应该安装在防尘罩外面，请在防尘罩上钻个孔，让线穿过去 FEEDBACK: If we make a hole in the dust cover, water and dust will eventually get inside the head light and could become a problema.如果开个孔的话，水还有灰尘 都会进入大灯中，这会是个问题 The first LED kit sample that we tested, did not need a hole in the dust cover. The module box of the first kit was a lot smaller than the actual, as you can see in the pictures in the next page. 第一套LED样品，不需要在防尘罩上开孔。第一套的

　　LED汽车大灯接受

　　LED Head LightACTUAL KIT 现在的

　　FIRST KIT 第一套

　　ACTUAL KIT 现在的

　　FIRST KIT 第一套 ACTUAL KIT 现在的

　　FIRST KIT 第一套

　　ACTUAL KIT 现在的

　　FIRST KIT 第一套

　　LED汽车大灯接受

　　Bulb ComparisonORIGINAL BULB LED BULB

　　Original bulb base diameter: LED bulb cooling fan diameter:

　　43 mm 50 mm

　　LED汽车大灯接受