卧加系列报警信息中英文

卧加系列报警信息（中英文对照）
EX0018 ALL –AXES A cycle start has been activated without the
all-zero-returns after a machine lock cancel
NEED ZERO RETURN A33.4

EX0018 所有轴需要原点返回 机床锁住取消后所有轴没有回原点就按了循环
启动按钮

EX0019 WORK COUNTER A cycle start has been activated with the PC or
external work counter at full count.
AT FULL COUNT A32.2


EX0019 工件计数个数达到设定值了 工件计数个数已达到设定值了，再按循环启动按
钮就出现上述报警
EX0020 EDITNG KEY SWITCH ON A00.0 A cycle start has been activated with Editing
Key

Switch on
EX0020 编辑键开关打开了 编辑键开关打开时按下了循环启动按钮

EX0021 TOOL IS NOT CLAMPED A00.1 A cycle start has been activated while the tool
Is not clamped
EX0021 刀具没有夹紧 刀具夹紧按键没有执行按下了循环启动按钮
EX0023 START INTERLOCK A00.2 A cycle start has been activated while an
external start interlock signal has been input
SIGNAL ON
EX0023
EX0026 CLOSE DOOR A00.4 A cycle start has been activated without door
closed .Closed the door
EX0026 需要关门 操作门没有关上就开始执行循环启动按钮
EX0047 WRONG COMBINATION
OF M-CODES A00.7 M codes in same group has been given Or
Wrong combination of M codes has been
Given
EX0047 M代码组合错误 多个M代码放在一个程序行里或者给出了
一个不被识别的M代码
EX0065 SENSOR OVER A24.5 Z-axis sensor over travel signal is activated
TRAVEL
EX0065 传感器超程 当前所用的传感器超程了
EX0068 INTERLOCK RELEASE A00.5 Door interlock release state has been invalid
TIME OVER
EX0068 互锁释放超时 操作门互锁释放状态是无效的，检查门锁钥
匙是否在开的位置